Minecraft Tips and Tricks 2022 | Minecraft Beginners Guide 2022 | Best Survival Tips

Welcome to Gaming Freak Guide Tutorial. In this post, I’m going to show you How to Survive in Minecraft.

Tips to Survive and Avoid the Mobs. And you will know How to build Minecraft House.

So Without Wasting Your Time Let’s Get Started….

Before Starting Minecraft Survival Guide if you want to Know How to play Minecraft Free on PC & Mobile please click on below Article.

10 Easy Tips, How to Download Minecraft Free on PC & Android

Minecraft Survival Guide 2022

  • Survival Mode– is a mode where a certain player will have to stay alive by establishing and modifying the terrain to satisfy their needs while also keeping an eye into the ever-present Health Bar as well as Hunger Bar.
  • The danger of either bar depleting to life-threatening levels arises depending on the difficulty the player chooses to play in. The aim of the game is to survive.
  • Without acquiring the necessary resources, it would indeed be impossible to do so for much longer.

 Introducing the HUD

  • Heads-Up-Display (HUD) is a collection of icons and status bars at the bottom of the screen. It is an important factor in Survival Mode because it displays all the possible indicators.
 Introducing the HUD

Note: The HUD gives key indications of status. Health is of most importance, but low hunger also suffers from poor health, so keep a keen watch on both.

1Armor Bar4Oxygen Bar
2Health Bar5Hunger Bar
3Experience Bar6HotBar

Each HUD section provides a key snippet of information regarding your avatar’s health or status:

  • Armor bar– the armor bar indicates the current level of absorption of damage when you have fitted your character with some form of armor.
  • Each armor icon reflects an 8% reduction in the damage you are going to suffer, so a 10/10 armor suit reduces the damage you are taking by 80%, while a 1/10 suit only absorbs 8%.
  • The more damage it takes, Armor is less effective, but the rate at which it deteriorates also depends on its material — leather being the weakest, and diamond being the strongest.
  • Although the HUD only shows 10 armor icons, each covers 2 points, rendering an average 20 points.
Minecraft armor bar
  • Health bar – are also available with up to 20 health points, defined by the 10 hearts displayed. Any time you suffer injury, such as hunger, spider bites, zombie slaps, a fall, being too long under water, and so on, half a heart or more will vanish.
  • Accompanied by a recognizable clicking sound. Health and hunger connect in a complex way.
Minecraft Health Bar
  • Experience bar – The more you mine, smelt, cook, kill aggressive gangs, trade with villagers and fish the more the experience bar increases. Your present level is reflected in the bar center.
  • Once it’s complete you transfer to the next level of experience. Experience is generally not important until you start enchanting things like swords and offering them additional powers.
  • Like other role playing games, Minecraft experience is more of an asset you ‘re spending on enchantments so it ebbs and flows.
  • Yet all the experience you have acquired from your last death, including the experience you spent on enchantments, counts against the total score when you die on the screen.
  • Killing a mob drops orbs that either fly straight to you or float to the ground, awaiting so that you can catch them.
  • You can also gain more experience by smelting other things in a furnace and doing other activities including finding rare ores, breeding animals, fishing and much more.
  • Dying, however, decreases your level of experience to zero, even though you can rebuild it a little by scooping up your own experience orbs (seven within each level you’ve acquired) after you re-spawn, if you can manage to get back in less than 5 minutes.
Minecraft Experience Bar
  • Oxygen bar – The oxygen bar pops up while you’re underwater and begins falling rapidly. Your well being starts taking a two-point hit every second as soon as your oxygen level reaches zero, but it resurfaces only for an instant if you hold down the jump key before you touch air once again.
  • For deep dives there is no risk, either. This ability can be used to do fascinating things, such as constructing an underwater base.
Minecraft Oxygen Bar

Note: Underwater bases are unaffected by mob attacks (but watch over your oxygen as you create one). In general, the only mobs that spawned outside the enormous ocean monument structures are calamities that do not present any danger to you.

  • Hunger bar – You do have 20 hunger points, and a secret value called Saturation available. The same as armor and health, each hunger bar icon retains 2 points and can be reduced by half an icon at a time (that icon is, by the way, a shank, or the lower part of a meat leg).
Minecraft Hunger Bar
  • Hot bar – These nine slots represent objects which you can pick with the scroll wheel of the mouse or click the 1–9 key. To access your full inventory and adjust the items in these slots, click E.
  • The white number next to a slot indicates the count of similar objects stacked by that slot. Additionally, under the icon of each tool, a durability bar appears in gold, and it slowly decreases as you use the tool until it eventually breaks and disappears from your inventory.
  • You’ll have a warning about this because when it’s close to zero, the bar changes color and turns into red. Eventually, every object you ‘re dual-wielding appears as an icon to the left of the hot bar.
Minecraft Hot Bar

NOTE: If you ride a horse the HUD switches so that it shows the health of the horse in place of your hunger score. The bar on experience also changes to the bar on the jump.

Minecraft for Beginners 2022

How to Avoid to Monsters

There’s a major difference between the first-day and second-day Minecraft world. In a word, to be precise, the mobs (hostile ones).

Mobs breed only in dark areas, and some mostly during the night, so you’ll be relatively safe if you’re outside on your first day and remain in well-lit areas.

However, by the second day mobs had an opportunity to build up their numbers and walk about. It is not very likely that you will meet them on day 2, but it is important to be prepared.

There are over two dozen types of hostile mobs: Enderman, Iron Golem, The Wither, Creeper, Ender Dragon, Zombie, Baby Zombie, Zombie Villager, Endermite, Giant, Blaze, Slime, Wither Skeleton.

Ghast, Silverfish, Witch, Human, Skeleton, Spider, Cave Spider, Wither Skeleton Jockey, Magma Cube, Spider Jockey, Zombie Chicken Jockey, Guardian, and Elder Guardian. Of those, here are the ones you might meet on your second day outside:

Minecraft Hostile Mobs
  • Zombies – Zombies boil away in the sunlight but still can live in darkness or rain or while wearing helmets, and they’re safe in caves all day or night times, of course.
  • They are fairly easy to beat, so if someone comes out of the shadows behind you, just head out through a well-lit area and keep your distance while they burn up in the light.
Minecraft zombie
  • Skeletons – Skeletons also burn up in sunlight unless they’re wearing helmets, and they can survive at any time in lower light conditions. They’re quite deadly with a bow and arrow and best avoided for now.
Minecraft Skeleton
  • Spiders – Spiders come in two varieties: big and grotto. At this point you’ll only see only the big spiders. Throughout the day they are passive but become aggressive in the shadows and can attack if provoked at any time.
  • They are going to climb, they’re going to jump, and they’re going to be pretty darn fast. Fortunately, with some swift sword attacks, they too are easy to kill. Smaller, poisonous cave spiders are the blue spiders.
  • They still stay in underground abandoned mine shafts, but do so in large numbers. If you see a skeleton riding a spider, you have just come across the rather rare jockey spider.
Minecraft Spider
  • Creepers – Creepers has a very well-earned reputation as the bad dudes at Minecraft.
  • They’re packed with gunpowder into their green gills, and start their very quick 1.5-second fuse as soon as they’re within three blocks of you.
  • Their blast will do you, surrounding buildings and the environment in general a lot of real harm.
  • When you hear a creeper’s fuse — a soft hissing sound — but didn’t see it, run in the direction you ‘re looking like hell.
  • Remember to sprint your W key by double-clicking and holding. You’ll get three blocks away with that little bit of luck, and the creeper’s fuse would reset. Creepers are generally best dealt when using a variety of bow and arrow attacks.
  • That being said, if you sprint after them with an iron or diamond sword as well as take a swipe at the right time, you can send them out of their suicidal detonation range to reset the fuse.
  • Most creepers wake up around midday, generally leaving the afternoon free from their specific brand of terror.
Minecraft Creeper
  • Slimes — they generate or spawn in the swamp bio-me, and underground in some places. They initially spawn as small , medium-sized, or relatively large green gelatinous blocks and are more than able to inflict damage.
  • Attacking eventually breaks them up into two to four new medium-sized slimes. These slimes can still attack but are relatively easily killed, at which point they spawn a further two to four tiny slimes each.
  • These last slimes don’t cause any attack damage but may still push you into peril if you’re unlucky.
Minecraft Slime

Note: If you come across a lone spider, a zombie, or even a slime, that’s as good a time as any to get in some sword practice. Merely point the monster at your cross hairs and hit the left mouse button.

Keep clicking as fast as you can, and you’ve got a very good chance of killing the mob and picking up any items it drops before it lands too many blows. Try to avoid the other mobs for now.

6 Best minecraft tips and tricks 2022 to Survive and Avoid the Mobs

  1. Remain in the open area as much as possible, and avoid heavily forested areas when possible.
  2. Most mobs have radar detection on 16 blocks. If they can draw the line of sight to your position too, they will enter the mode of pursuit. (Spiders will still detect you, even through other blocks).
  3. At that point, they’ll plan endlessly and take a path to your location, tracking you through some other blocks without needing a line of view. Stays engaged in pursuit mode much further than 16 lines.
  4. Keep your volume turned up, because you’re going to hear mobs in 16 blocks, but, as their name implies, the creepers are silent.
  5. Do not walk down the edges of hilly terrain. Creepers can drop their fuse already ticking at you from above. Seek to go up and down hills first, so that you have a good view of the landscape ahead.
  6. Mobs are very sluggish, so you can easily set some distance between them and yourself by maintaining a steady pace and circling around and get back to your shelter. Sprint mode leaves them so far behind.

Your Mission: FOOD, RESOURCES and Reconnaissance

Your second day is the ideal time to gather food and other tools and take a quick tour of the countryside around your first shelter.

In specific, you want to locate your first outdoor shelter somewhere appropriate. Keep an eye out for one of these:

Passive mobs – Chickens, pigs, rabbits, sheep and cows all could provide sufficient amount of raw or cooked food, but cooked meat can restore more hunger points than raw ones.

Cows also spill leather, which you can use for your first weapons, and you can milk cows once you have an iron bucket, and milk can provide you with an instant poison cure. Chickens lay an egg, too, so pick up any you find.

Minecraft Passive Mob

Natural harvest – The harvest contains cacao pods, bananas, sugar cane, carrots, wheat, and potatoes (found in villages), and seeds. Knock tall grass down to collect seeds.

They ripen into wheat within five to eight day / night cycles whenever you plant the seeds. It’s easy to bake bread from wheat, one of the easiest but most effective food sources , particularly when there’s no passive mobs around.

Construction resources – Through digging into the ground you can mine plenty of cobblestone very safely to enlarge your original shelter. Yet some other tools are certainly going to come in handy:

  • Wood – Wood is often useful both to crafting and fueling your furnace in which you can turn it into charcoal and make torches afterwards.
Minecraft wood

Sand – You can smelt sand into blocks of glass, which could then be used as is or made into glass panes to enable daylight to reach your shelter.

Minecraft Sand

Coal – Coal is used for lighting the furnace and for producing torches. On the surface of the walls of small caves, or on the sides of cliffs, you can also see it in veins. When you can get to it securely, make it like a miner and dig it out.

Minecraft coal

How to Find a Minecraft Building Site

Only keep an eye out for a new construction site while you scout around. It doesn’t have to be fantasy or even tall.

A space of 6 by  5 manages just fine, and even 6 by 4 or so can fit in the basics. You also can level the field to open space, and cut down few other trees.

Minecraft flat ground

How To Build Minecraft Simple HUT

So, what can you bring together on this site? It requires 34 blocks of cobblestone to dig out of the first shelter and 12 blocks of wood for the roof, which you acquire by cutting down the three trees that occupied the site.

Minecraft House without roof

The model for a small, 46-block, cobblestone cabin, roof not shown. The sharp-eyed will find that one space further can be reduced in width, but the additional space is within the four blocks cost.

The roof can be made from nearly any useful material, like dirt, cobblestone, or wood. Remove the dropping blocks, like gravel and sand. A two-block-high wall holds all crowds away excluding spiders.

Spiders can quickly reach two walls, but a wall overhang holds them out, because they are unable to climb upside down.

However, only adding a roof is safer, particularly when there are distant trees that the spiders can try to climb and use as staging grounds to leap straight into your house.

Minecraft Finished Hut

The completed hut-simple but useful. So this is evidence of the spider. Even though there is a wide gap above the entrance, the entrance covers the entire space in Minecraft’s geometry, preventing the mobs out.

How To Build Minecraft A Large House?

Minecraft Guide for Beginners

  • Step 1: THE FRAME

Find a Wide and Flat Area which can cater 12 Pillars

Minecraft Frame

Fill every gaps using cobblestones.

Minecraft Frame_Walls
  • Step 3: BUILD IT UP

Now, go up by three, on top of the logs. After that, replace all the logs up at the top with more logs. You’ll would also like to build in the walls shown here.

Minecraft Build It UP

Much as you did on the first floor, build up the wood logs by 4 and tie them up at the top then fill in the walls with wood.

Consider leaving the section on the left as one layer. This will be made as a balcony.

Minecraft 2nd Floor

Soon to be on the far right of your house do as you did with the past 2 floors and go up by 3 and join them up at the top. Do so twice. Then fill those pieces.

Minecraft More HEIGHT
  • Step 6: THE FLOORS

Fill In The Floors! Do it like the image shown below.

Minecraft Floors
  • Step 7: THE ROOF

This will be a tricky one for the roof, just look at the picture and make it like a pyramid like shape just as show in the picture.

Minecraft ROOF
  • Step 8: THE WINDOWS

Place Glass Planes to the gaps that we have left.

Minecraft Windows

Put some walls like this one in the Picture.

Minecraft Doors

The ladder will be put on the tower to split a spot for your stairs to lead.

Minecraft Stairs

Add torches to light it and fill this with all your survival requirements.

Minecraft Torch
Minecraft Large House

The Require Materials for Minecraft Crafting Tricks Beacon

Minecraft Beacon Materials

3 Steps How to craft a Beacon in Minecraft Survival Mode

  • Step 1: Find the Crafting Menu and Open It.
Minecraft Crafting Menu
  • Step 2: Adding the Items

You will see a crafting area in the crafting menu which consists of a 3×3 crafting grid. In the 3×3 crafting grid, put 5 glasses, 1 nether star, and 3 obsidian to make a beacon.

It is critical, when making a beacon, that the glass, nether star and obsidian are placed in the exact pattern as the image below.

There would have been 3 glass in the first section.

There should be 1 glass in the first box in the second row, 1 nether star in the second box and 1 glass in the third box.

There should be 3 obsidian inside the third box. This is the formula for a beacon that Minecraft makes.

Minecraft Beacon 2
  • Step 3: Moving the Beacon to Your Inventory

Once a beacon has been made, you need to transfer the new object into your inventory. And It’s done! You created your Beacon!

Minecraft Beacon 3

3 Steps How to craft  an Observer in Minecraft

Another important thing in your inventory at Minecraft is an observer. It is used for detecting changes in adjacent blocks.

The Required Materials to make an Observer in Minecraft

Minecraft Observer Materials

Step 1: Find the Crafting Menu and Open It.

Minecraft Crafting Menu

Step 2: Adding the Items

  • You will see a crafting area in the crafting menu which consists of a 3×3 crafting grid. In the 3×3 crafting grid, position 6 cobblestones, 2 redstone and 1 nether quartz to create an observer.
  • It is necessary, when making an observer, to position the items in the exact pattern as the image below. There should be 3 cobble-stones in the first section.
  • In the second row, the first box will contain 1 redstone, 1 redstone in the second box and 1 nether quartz in the last. There should be 3 cobble-stones in the third section. This is an observer ‘s guide for Minecraft crafting.
Minecraft Observer 1

Step 3: Moving the Observer to Your Inventory

  • Once an Observer has been made, you need to transfer the new object into your inventory. And It’s done! You created your own Observer!
Minecraft Observer 2

3 Steps How to Make a Composter in Minecraft

Materials Needed:– 7 Slabs (any type will do)

Step 1: Find the Crafting Menu and Open It.

Step 2: Adding the Slabs

  • Attach the 7 wood slabs to grid in the carving table. You may use wood slabs of any sort like maple, dark maple, spruce, birch, jungle or acacia wood.
  • The slabs should be connected to the grid in the same pattern as seen in the image below. Place 1 wood slab in the first box in the 1st row, and 1 wood slab in the 3rd column.
  • Place 1 wood slab in 1st box in the 2nd row, and 1 wood slab in 3rd box. Place the remaining 3 wood slabs down in the 3rd row, one in each stack. This is the formula for a Minecraft Composter.
Minecraft Composter 1

Step 3: Moving the Composter to Your Inventory

  • Now, we’ll drag the Composter back to your inventory so that you can use it. And it is! Minecraft Composters are a block in which food and plants are processed into bone meal. They are also being used as a block of villagers’ work sites.
Minecraft Composter 2

3 Steps How to Craft Smithing Table Minecraft

After the recent release to Minecraft (1.14), a Smithing table can be created within a village blacksmith ‘s building. Players may also render them, by following this tutorial.

If a village has a Smithing table but no toolmaker, a nearby villager with no occupation has the ability to become a tool maker.

Required Materials:

You can really use some sort of wood planks. Then you only need to pick 2 iron ingots and 4 wood planks of the same sort.

Minecraft Smithing Table 1

Step 1: Find the Crafting Menu and Open It.

Step 2: Adding the Materials

  • Place 2 iron ingot and 4 wood planks into the crafting grid to make a Smithing table.The iron ingot and wood planks are essential to be put in a certain patter.
  • In the first row, 1 ingot of iron should be in the first box, and 1 ingot of iron in the second.
  • Place 1 iron ingot and 2 wood planks in the first column respectively, then do the same in the second column. Leave empty to third board.
Minecraft Smithing Table 2

Step 3: Moving the Smithing Table to Your Inventory

  • A Smithing table icon should appear in the crafting menu after you have put the materials correctly.
  • Move it to your inventory once the crafting is completed.
  • Congratulations, you’ve just made a Minecraft Smithing table.
Minecraft Smithing Table 3

Where To Find Foxes in Minecraft?

Minecraft foxes spawns in taiga, giant taiga and snowy biomes and are nocturnal mobs which make them more likely to spawn at night , particularly in forests.

Minecraft foxes living in snowy biomes have white fur but in many other biomes have the same behavior as foxes. They usually spawn in 2-4 classes, with a 5 percent chance that they spawn as baby foxes.

How To Tame Foxes in Minecraft?

Spawned baby foxes won’t trust you, but if you give a sweet berry (which foxes love) to two adult foxes, the baby they create will trust your match.

While baby foxes are used to pursuing adult foxes, you can add a lead to your new tamed bubba fox until it matures to stop it from running away.

Minecraft Tame Fox

What is BLAST FURNACE in Minecraft

  • Blast furnaces could be found in armorer houses at Minecraft villages. If there is no villager armorer that used a blast furnace as the block of their work site, then every villager Minecraft mob can turn their profession into armorer.
  • This Minecraft block works at a normal furnace ‘s speed double which can be used to smelt ores, iron armor, and tools.
  • You will first need to design a regular furnace to build a blast furnace – you could do this using eight pieces of Cobblestone in the building grid.
Minecraft Blast Furnace

Materials Needed for Crafting:

  • You Must have 5 Iron Ingots
  • You Must have 3 pieces of Smooth Stone
  • You Must have a Furnace

3 Steps How to Craft Blast Furnace in Minecraft

Step 1: Find and Open the Crafting menu

Step 2: Adding the Materials To the Craft Menu

  • Pull up your crafting grid and load the top row with Iron Ingots. Two of the remaining Ingots will go on either side of the middle row with furnace placed in the center of the grid. 
  • Add three smooth stones in the bottom row and you will be ready to create your blasting furnace.
Minecraft Blast Furnace 2

Step 3: Moving the Blast Furnace to your Inventory

  • When your Blast Furnace is prepared, you’ll need to put it into your inventory.

4 Steps How to Use Blast Furnace in Minecraft

Step 1: Put the Blast Furnace

  • Pick the blast furnace in your hotbar to use a blast furnace. If you don’t have a blast furnace in your inventory, you can easily produce one for a blast furnace with a crafting recipe.
  • Next, put your pointer (the plus sign) on a block at which blast furnace is to be mounted. In your game window you can see the block being illuminated.
Minecraft Blast Furnace 5

Step 2: Adding a Fuel to the Blast Furnace

  • You can use charcoal as a Fuel to the Blast Furnace, but there also some fuel alternatives.
Minecraft Blast Furnace 6

Step 3: Adding the Items

  • First, place an object that you want to smelt like diamond ores in the top box of the blast furnace. You can see the item smelting from the fire.
Minecraft Blast Furnace 7

Step 4: Moving the Item to Inventory

  • Once it is done, it is now time to put the items that you have made using the Blast Furnace to your Inventory.
Minecraft Blast Furnace 8

3 Steps How to Make a Grindstone in Minecraft

A further important item in your inventory is the grindstone in Minecraft. A grindstone is used for the repair of items or the removal of enchantments.

Materials Needed:

Make a Grindstone

Note: You can choose any type of these wood planks, you don’t have to use them all.

Step 1: Find and Open the Craft Menu

Step 2: Adding the Items

You will see a crafting area in the crafting menu which consists of a 3×3 crafting grid. In the 3×3 crafting grid, put 2 sticks, 1 stone block, and 2 wood planks to create a grindstone.

You may use any kind of wood planks, such as maple, spruce, birch, forest, acacia, dark maple, crimson, or twisted frames, when crafting with wood planks. In our example, we use planks made of oak wood.

It is important, when making a grindstone, that the sticks, stone slabs, and wood planks are placed in the exact pattern as shown below.

There should be 1 stick in the first box in the first row, 1 stone slab in the second box and 1 stick in the third. In the second row 1 wooden planks should be in the first box and 1 wooden plank should be in the third box.

This is the crafting recipe for a grindstone from Minecraft.

Minecraft Grindstone 3

Step 3: Moving the Grindstone to Inventory

Once the grindstone is crafted, move it now to the Inventory.

2 Steps How to Use Grindstone in Repairing Weapons

  1. You just had to put in it two things of the same sort, and fix the top piece. It exposes the Repair & Disenchants tray, where you’ll see the inventory below with two slabs on top.
  2. The piece at the bottom is accumulated for the repair process. So make sure to put the Weapon or tool at the top for repair and at the bottom, a similar one.

6 Steps How to Use Grindstone to Remove the Enchantments

  1. To extract enchantments from any object in Minecraft, put the enchanted objects in and trigger one of the two slots.
  2. You can also get rid of enchantments instantly and you’ll gain some experience to remove each.
  3. Having Minecraft Grindstone can also help you get rid of a penalty for previous work on an object. It is a way to make tools refresh.
  4. So use Minecraft Grindstone to hold things in the best condition and in Minecraft it’s a kind of very useful tool.
  5. Once you start putting same type of damage items, their durability is merged and the new object gets an additional bonus of +5 percent.
  6. That’s how you use Minecraft Grindstone in the game, and use it to fix items and remove enchantments.

3 Steps How to Download and Install Minecraft Optifine

Step 1: Download the File Optifine and Select the Appropriate version.

Minecraft Optifine

Step 2: Activating the Installer

Step 3: Run the Minecraft and Choose Optifine Profile

Minecraft Optifine 2

Note: You’ll know, when you see the profile name on the Minecraft page, it works successfully.

Minecraft Optifine 3

What is the Purpose of Minecraft Optifine

  • When it comes to client-side modifications Optifine is a great choice. Optifine will boost (even double) your fps, which will help make your Minecraft smoother which cleaner than ever before!

That’s all for Minecraft Survival Beginners Guide. I hope you become Pro with this tutorial. if you like the post pls comments and suggest for Guide Post.

Sharing Is Caring:

Hi, I'm Manish Mishra, founder of GamingFreak. A blog that provides authentic information regarding Games Updates, Gaming Guide, Upcoming New Games News, and Become Noob To Pro in league of legends - Wild Rift, Mobile Legends & Champions Legion.

Leave a Comment